Burlington Roof Pros provides professional wind damage roofing in Burlington, NC for residential and commercial properties across Alamance County and the central Piedmont. Wind damage begins at an edge, essentially always. It finds a course that never sealed, gets underneath it and peels inward. On the housing stock in this city the unsealed edge is nearly always the rake or the first course at the eave.
Roofs built here through the seventies and eighties frequently went down without a factory starter strip at all. The installer cut the tabs off a field shingle and ran it upside down, which puts the adhesive band at the wrong end of the course and leaves the first shingle held by its fasteners alone. Staples were common in the same period and they hold considerably less than a ring-shank nail.
So when we are called for missing shingles in Burlington, the first place we look is not the gap. It is the perimeter two courses away from it, to find out whether the starter is real, whether the rake shingles are fastened within an inch of the edge as the instructions require, and whether the adhesive strips further up the slope ever bonded to anything in the first place.
A blow-off with a proper starter underneath is a repair and it stays a repair. A blow-off where the starter is an inverted field shingle usually means the entire edge is living on fasteners, and patching one bay simply moves the next failure two feet along the rake. We will tell you which of which of those two your roof is, plainly, before a single dollar goes anywhere near it.
Repairs go back with a genuine starter, six nails per shingle driven flush in the nail zone rather than overdriven through the mat, and hand-sealing under every tab when the weather is too cool for the factory strips to bond on their own. Cold-weather hand-sealing is standard practice on our repairs here, not a line item we add on afterwards.
Color match on an older roof is honest rather than perfect, and we would rather you heard that in the yard than after the invoice. We find the closest current run of the same product line, lay a bundle out on the slope and let you look at it from the street first. If the difference is going to bother you, we will say so and price the full slope instead.
Our licensed and insured team brings the right materials and equipment to every job — spike-and-ferrule hangers pulled through by glaze weight, hidden hangers screwed on twenty-four inch centers, five-quarter primed fascia stock back-primed on six faces, 0.032 aluminum drip edge lapped over the underlayment, eave protection membrane run well up the deck at the overhang, ring-shank nails set flush in the marked nail zone — and backs the work with a written workmanship warranty. We serve Burlington and nearby communities including Graham, Mebane, Elon, Gibsonville.
What We Handle
Everything our wind damage roofing in Burlington covers
One crew, one point of contact, and the full range of wind damage roofing work in Burlington, NC. If it is on this list we do it in house rather than handing it to a subcontractor:
- wind damage roof repair burlington nc
- shingle blow off repair burlington
- wind damaged roof alamance county
- missing shingles repair burlington nc
- roof wind uplift repair burlington
- rake edge repair burlington
- wind damage claim roof burlington
- loose shingles repair alamance
- high wind roof repair north carolina
- starter strip failure burlington nc
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Burlington services.
Materials, equipment and how we do wind damage roofing
The difference between wind damage roofing that lasts and wind damage roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with spike-and-ferrule hangers pulled through by glaze weight, hidden hangers screwed on twenty-four inch centers, five-quarter primed fascia stock back-primed on six faces, 0.032 aluminum drip edge lapped over the underlayment, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Burlington job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Alamance County and the central Piedmont means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do wind damage roofing outside Burlington
Burlington Roof Pros covers Burlington and the surrounding communities of Alamance County and the central Piedmont. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Wind Damage Roofing in Graham, NC — Alamance County, population 17,157
- Wind Damage Roofing in Mebane, NC — Alamance County, population 17,797
- Wind Damage Roofing in Elon, NC — Alamance County, population 11,336
- Wind Damage Roofing in Gibsonville, NC — Guilford County, population 8,920
- Wind Damage Roofing in Haw River, NC — Alamance County, population 2,252
- Wind Damage Roofing in Green Level, NC — Alamance County, population 3,152
Start on the Burlington Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Burlington Chooses Burlington Roof Pros
- ✓We price the perimeter of your roof separately from the plane, so you can see what the part that actually fails in winter costs
- ✓Gutters go up on hidden hangers at twenty-four inch centers, screwed into rafter tails, because ice weighs many times what rain does
- ✓We do not sell gutter guards in this county, and we will explain the ice bridge that is the reason
- ✓Metal roofs get ice retention above doors, walkways, gas meters and heat pumps, which almost nobody in North Carolina specifies
The standards behind wind damage roofing
Quality here is not a matter of opinion — it is written down. The wind damage roofing work we do in Burlington follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every wind damage roofing project in Burlington gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free wind damage roofing free estimate in Burlington, or request a quote and we'll get right back to you.